Accessories
To use our products in the best conditions, we advise you associated accessories.
For specific demands, send your request to marketing@seismowave.com.
Cables
MB3a/MB3d power cable
3 pin Fischer connector to fast on plug, 2 wires, 1.5 mm², Ø 9.3 mm
Standard length : 3 meters
Signal cable
18 pin Fischer connector to not wired, 18 wires AWG24 Ø 8.48 mm shielded.
Standard lenght : 3 meters
GPS cable
Coaxial TNC to TNC
KG58C/U 50 Ω PVC, Ø 4.93 mm shielded.
Standard length : 5 meters
MB200x power cable
Fast on plug to JUPITER connector, 2 wires, 1.5 mm², Ø 4.93 mm
Standard length : 3 meters
PC/USB cable
18 pin Fischer connector to USB
4 wires AWG25 shielded.
Standard length : 1.5 or 3 meters
MB3d serial cable
18 pin Fischer connector to DB9, connector 3 wires AWG24 shielded.
standard length : 3 meters
Magnet adjustment cable
18 pin Fischer connector to banana plugs designed to adjust the magnet position (multimeter required).
Tools
GPS cable
Coaxial TNC to TNC
KG58C/U 50 Ω PVC, Ø 4.93 mm shielded.
Standard length : 5 meters
Magnet adjustment cable
18 pin Fischer connector to banana plugs designed to adjust the magnet position (multimeter required).
GPS antenna PROCOM 2000B
Flat-pack GPS-antenna for fixed installations.
Full hemispherical coverage.
Built-in high gain, low noise amplifier.
Right-hand circular polarization (RHCP).
3 V or 5 V supply voltage.
DC supply via RF-connector.
EMC tested to IEC 801 and IEC 255.
Provided with TNC (female) connector.
ROHS compliant.
datasheet: gps-2000.en-GB
Magnet Wrench
Specific wrench designed to adjust the magnet position.
TNC Male to TNC Male Right Angle Adapter
Right angle adapter to connect directly the GPS antenna PROCOM 2000B to the MB3d, without cable.
RS232 to Ethernet converter for MB3d
The RS232 to Ethernet converter allows remote retrieval of your MB3d miniSEED files through secure FTP access.
Datasheet
Packaging
Screwpack
Plastic packaging for one Mb3a or Mb3d, protected into specific foams.
Not watertight, crush-proof and dust-proof, water, oil-projection and humidity resistant.
Weight : 0.4 Kg
Carton box
Carton box specially designed for MB3a and MB3d transportation.
Pelicase 1430 (1-2 sensors)
Pelicase 1430 with adapted foams available in 1 sensor or 2 sensors (MB3a or MB3d).
Dimensions : 345 x 146 x 297 mm
Weight : 2.59 Kg
Pelicase 1650 (6 sensors)
Pelicase 1650 with adapted foam specificly designed to carry 6 MB3a and cables. Equipped with one telescopic handle and 2 wheels.
Dimensions : 724 x 441 x 267 mm
Weight : 13.47 Kg
Battery
Battery Yuasa
12V BATTERY
12Ah /12V Lead Acid
97.5 X 98 X 151 mm / 4kg
Quick Connect
Charge Current Max: 3A
Cyclic Charge Voltage
Max:15V
Datasheet : NP_SERIES_BROCHURE_NP12-12
Interconnection boxes
Interconnection boxes
